Harvey Products      73 Wright Lane      North Kingstown RI      02852      401 295 8382
 

Specifications
can change without notice

Inflatable Bladders:

Extra strong 10 mil polyurethane fabric.  RF welded seams more reliable than ever, more tear and puncture resistant, tough yet resilient.

Nevertheless, accidents can happen and should you puncture the tube, before replacing you can try a product called "Tear-Aid" carried by West Marine and others. The "A" type is for the polyurethane bladder and the "B" type will work on the vinyl outer cover if needed.

 

Outer Protective Covers:

Super tough polyester reinforced vinyl fabric with UV inhibitors. See "B" type Tear-Aid above.

Color: Neutral Gray
Length: 7 ft. x 10.5 in. inflated
Seams: Machine sewn with UV resistant polyester thread.

Braided attachment line to secure ends of Dinghy Dogs to black nylon Cleats 3", four provided with necessary s.s. screws.

pump

The Bravo2 pump included with your Dinghy Dogs will inflate one bladder in about 60 seconds. The pump is supplied with several adapters, one of which will fit your valve. Others can be used for different devices. Hold on to them.

Attach tubes to boat:

Dinghy Dogs covers have a flap sewn to the middle which has a special rod sewn into the edge.  This rod is slid into a PVC track which has been permanently affixed to the boat 10" from the rail.  The track is held to the boat with 1/2" stainless screws and 3M VHB™ double coated industrial grade acrylic foam tape with super high bond adhesive: .025" thick, 800kg/m3 foam density, 160 lbs./sq." tensile.

Tube length: 84"
Track length: 12"
Tube Diameter: 10.5" inflated.


Home | Specifications | Installation | Owner Comments | Order | Contact | Risk Free

Site Meter Valid HTML 4.01 Transitional